Application method: The solvent, when stirred, is added in small portions to the paintwork until the desired consistency is obtained. Preventive measures, storage and utilization: Keep away from children! Store and transport in tightly sealed container containers, protecting from moisture and direct sunlight. Not afraid of frost. Dispose of closed
Application method: The solvent, when stirred, is added in small portions to the paintwork until the desired consistency is obtained. Preventive measures, storage and utilization: Keep away from children! Store and transport in tightly sealed container containers, protecting from moisture and direct sunlight. Not afraid of frost. Dispose of closed
Application method: The solvent is ready for use. Add white spirits in small portions to paint and varnish materials that are to be diluted, then mix until the desired consistency is obtained. Preventive measures, storage and utilization: Keep away from children! Store and transport in tightly sealed container containers, protecting
Application method: The solvent is ready for use. Add solvent in small portions to the varnish material to be diluted, then mix until the desired consistency is obtained. Preventive measures, storage and utilization: Keep away from children! Store and transport in tightly sealed container containers, protecting from moisture and direct
Holding time: Withstand the surface to be treated, depending on the thickness of the film to be removed, the type of coating and ambient temperature from 5 to 40 minutes. Method of application: Before use, it is necessary to REMOVE the rinsing. Wash the surface with a brush or brush
Surface preparation: Prior to painting, the wooden surface must be pre-cleaned with a sandpaper, cleaned of dirt and dust. The metal surface must be cleaned of dirt, old paint coatings, peeling oil or technical oils, rust, scale and degrease the solvent. dilution: If necessary, dilute with a suitable solvent to
Surface preparation: Parquet varnish is applied to a clean, polished parquet When applying on the old varnish coating it is recommended to pre-treat the surface with fine-grained abrasive paper, then disassemble and degrease the surface Dilution: If necessary, dilute with a suitable solvent to the working viscosity Inappropriate dilution of
Application method: Surface preparation: The wooden surface is pre-cleaned with a grinding skillet and is cleaned of dust The metal surface is cleaned of contaminants and degreased by the solvent Before applying varnish, the surface should be dry Dilution: If necessary, dilute with a suitable solvent to the working viscosity
Method of application: It is necessary to prepare the surface beforehand: clean from old coats, grind and degrease. • As a final layer, the varnish is applied after 30 minutes. after application of the last layer of enamel • Apply at a temperature of + 15- + 30 ° C
Method of application: It is necessary to prepare the surface beforehand: clean from old coats, grind and degrease. • As a final layer, the varnish is applied after 30 minutes. after application of the last layer of enamel • Apply at a temperature of + 15- + 30 ° C
Гаряча лінія
0-(800)-50-18-31
цілодобово, дзвінки зі стаціонарних і мобільних телефонів у межах України безкоштовні
Recent comments