Description
Application method:
Surface preparation:
Preparation of the surface: Metal surfaces: New – clean dust, grease, rust, scale, primer with an anti-corrosion fast-drying ZEBRA TM Kolchug series (according to the recommendations on the label).
Previously painted – to clean from paint and varnish coatings, which are exfoliated, polished, remove dust. When conducting painting work the moisture content of wood should not exceed 20%. Apply the enamel with a brush, roller or spray. Application: Mix thoroughly. In the presence of a surface film it must be removed. Apply the enamel with a brush, roller or spray. Before applying the next layer, make sure that the previous one is completely dry.
Dilution:
If necessary, dilute with a suitable solvent to the working viscosity. Inappropriate dilution of other solvents not provided herein and mixing with other paint and varnish materials.
Method of application:
Mix thoroughly.
In the presence of a surface film it must be removed.
Apply the enamel with a brush, roller or spray.
Before applying the next layer, make sure that the previous one is completely dry.
Preventive measures, storage and utilization:
Store and transport in tightly sealed container containers, protecting from direct sunlight. Not afraid of frost. Dispose of closed container with the remainder of the product in an organized place of collection of household waste.
When painting and after finishing, carefully ventilate the room. Use rubber gloves to protect your hands.
Reviews
There are no reviews yet.