Surface preparation: Not painted wood: Surfaces are sanded fine-grained sandpaper. If necessary, shrink the inequalities. Clean from dirt, dust and grease. Add a wood-preserving primer. Previously painted surface: Expansive coating to remove. Sharpen the inequalities. Coverings that hold firmly to polish fine-grained sandpaper to a matte state. The surface should
Application method: Surface preparation: Mix thoroughly. In the presence of a surface film, it must be removed. The paint should be dry, cleaned of dust, grease, rust, scale. The old paint and varnish coatings that are opaque must be removed. Apply the enamel by spraying, roll or brush. Before applying
Preparation for use: Primer thoroughly mixed, if there is a surface film it must be removed. If necessary, dilute the solvent to the working viscosity. Inappropriate dilution of other solvents not provided herein and mixing with other paint and varnish materials. Painted surface should be dry, dust-free, rust, scale. The
Surface preparation: Not painted wood: Surfaces are sanded fine-grained sandpaper. If necessary, shrink the inequalities. Clean from dirt, dust and grease. Add a wood-preserving primer. Previously painted surface: Expansive coating to remove. Sharpen the inequalities. Coverings that hold firmly to polish fine-grained sandpaper to a matte state. The surface should
Method of application: It is necessary to prepare the surface beforehand: clean from old coatings, grind and degrease • Before applying enamel, it is recommended to use ZEBRA dry quick-drying agent • Apply at a temperature of + 15- + 30 ° С • Shake the bottle for about minutes
Method of application: Pre-prepare the surface: clean from old coatings, grind and degrease • Apply at a temperature of + 15- + 30 ° С • Shake the bottle for a minimum of minutes to stir the contents. This will allow for homogeneity of the coating. • During the work
Method of application: Pre-prepare the surface: clean from old coatings, grind and degrease • Apply at a temperature of + 15- + 30 ° C • Shake the bottle for about minutes to stir the contents. This will allow for homogeneity of the coating. • In the course of the
Method of application: It is necessary to prepare the surface beforehand: clean from old coats, grind and degrease. • As a final layer, the varnish is applied after 30 minutes. after application of the last layer of enamel • Apply at a temperature of + 15- + 30 ° C
Гаряча лінія
0-(800)-50-18-31
цілодобово, дзвінки зі стаціонарних і мобільних телефонів у межах України безкоштовні
Recent comments