BLOG

Recent comments

    Primer GF-021 ZEBRA Folk Wizard series

    Surface preparation: The paint should be dry, cleaned of dust, grease, rust, scale. The old paint and varnish coatings that are opaque must be removed. Before finishing, make sure that the surface is completely dry. Dilution: If necessary, dilute with a suitable solvent to the working viscosity. Inappropriate breeding of

    Читати далі »

    Enamel PF-266 ZEBRA People’s Master series

    Surface preparation: Clean the surface from the old coating that is exfoliated, dust, grease and other contaminants. New products are sanded, cleaned of dust. New wood products are recommended to be ground with an enamel diluted solvent by 25%. Before applying enamel, the surface should be dry! Dilution: If necessary,

    Читати далі »

    Lacquer COLORED WEDDING ZEBRA

    Surface preparation: Before painting the wooden surface must be pre-cleaned with a grinding skin, cleaned of dirt and dust. Before applying the varnish, the surface must be dry! How to grow: Before use, thoroughly mix varnish, and clean the surface from dust, dirt and grease. The varnish is applied by

    Читати далі »

    Enamel alkyd PF-266 ZEBRA Watercolor series

    Surface preparation: Not painted wood: Surfaces are sanded fine-grained sandpaper. If necessary, shrink the inequalities. Clean from dirt, dust and grease. Add a wood-preserving primer. Previously painted surface: Expansive coating to remove. Sharpen the inequalities. Coverings that hold firmly to polish fine-grained sandpaper to a matte state. The surface should

    Читати далі »

    Enamel alkyd PF-116 ZEBRA series Watercolor

    Application method: Surface preparation: Mix thoroughly. In the presence of a surface film, it must be removed. The paint should be dry, cleaned of dust, grease, rust, scale. The old paint and varnish coatings that are opaque must be removed. Apply the enamel by spraying, roll or brush. Before applying

    Читати далі »

    Soil PF-010M ZEBRA Watercolor Series

    Preparation for use: Primer thoroughly mixed, if there is a surface film it must be removed. If necessary, dilute the solvent to the working viscosity. Inappropriate dilution of other solvents not provided herein and mixing with other paint and varnish materials. Painted surface should be dry, dust-free, rust, scale. The

    Читати далі »

    Soil GF-021 ZEBRA Watercolor Series

    Surface preparation: Not painted wood: Surfaces are sanded fine-grained sandpaper. If necessary, shrink the inequalities. Clean from dirt, dust and grease. Add a wood-preserving primer. Previously painted surface: Expansive coating to remove. Sharpen the inequalities. Coverings that hold firmly to polish fine-grained sandpaper to a matte state. The surface should

    Читати далі »

    Enamel PF-115 series

    Surface preparation: Clean the surface from the old coating that is exfoliated, dust and other contaminants New metal products are treated with anti-corrosion primer GF-021 TM Zebra series “People’s Master” New wooden products are sanded, cleaned of dust, ground with a diluted solvent enamel by 25% Before applying enamel, the

    Читати далі »

    Lacquer Yacht ZEBRA

    Surface preparation: Prior to painting, the wooden surface must be pre-cleaned with a sandpaper, cleaned of dirt and dust. The metal surface must be cleaned of dirt, old paint coatings, peeling oil or technical oils, rust, scale and degrease the solvent. dilution: If necessary, dilute with a suitable solvent to

    Читати далі »

    Parquet Alkyd ZEBRA

    Surface preparation: Parquet varnish is applied to a clean, polished parquet When applying on the old varnish coating it is recommended to pre-treat the surface with fine-grained abrasive paper, then disassemble and degrease the surface Dilution: If necessary, dilute with a suitable solvent to the working viscosity Inappropriate dilution of

    Читати далі »

    Lacquer alkyd PF-170 ZEBRA

    Application method: Surface preparation: The wooden surface is pre-cleaned with a grinding skillet and is cleaned of dust The metal surface is cleaned of contaminants and degreased by the solvent Before applying varnish, the surface should be dry Dilution: If necessary, dilute with a suitable solvent to the working viscosity

    Читати далі »

    Alkyd enamel PF-116 ZEBRA

    Application method: Surface preparation: The surface to be painted must be dry, dust-treated, rust, grease, oils, scale and other contaminants. Old paint and varnish coatings that need to be opaque must be removed To reduce the cost of paint work and increase the life of the work, the surface must

    Читати далі »

    Гаряча лінія

    0-(800)-50-18-31

    цілодобово, дзвінки зі стаціонарних і мобільних телефонів у межах України безкоштовні