BLOG

Recent comments

    Solvent ZEBRA

    Application method: The solvent is ready for use. Add solvent in small portions to the varnish material to be diluted, then mix until the desired consistency is obtained. Preventive measures, storage and utilization: Keep away from children! Store and transport in tightly sealed container containers, protecting from moisture and direct

    Читати далі »

    Enamel alkyd PF-266 ZEBRA Watercolor series

    Surface preparation: Not painted wood: Surfaces are sanded fine-grained sandpaper. If necessary, shrink the inequalities. Clean from dirt, dust and grease. Add a wood-preserving primer. Previously painted surface: Expansive coating to remove. Sharpen the inequalities. Coverings that hold firmly to polish fine-grained sandpaper to a matte state. The surface should

    Читати далі »

    Enamel alkyd PF-116 ZEBRA series Watercolor

    Application method: Surface preparation: Mix thoroughly. In the presence of a surface film, it must be removed. The paint should be dry, cleaned of dust, grease, rust, scale. The old paint and varnish coatings that are opaque must be removed. Apply the enamel by spraying, roll or brush. Before applying

    Читати далі »

    Soil PF-010M ZEBRA Watercolor Series

    Preparation for use: Primer thoroughly mixed, if there is a surface film it must be removed. If necessary, dilute the solvent to the working viscosity. Inappropriate dilution of other solvents not provided herein and mixing with other paint and varnish materials. Painted surface should be dry, dust-free, rust, scale. The

    Читати далі »

    Soil GF-021 ZEBRA Watercolor Series

    Surface preparation: Not painted wood: Surfaces are sanded fine-grained sandpaper. If necessary, shrink the inequalities. Clean from dirt, dust and grease. Add a wood-preserving primer. Previously painted surface: Expansive coating to remove. Sharpen the inequalities. Coverings that hold firmly to polish fine-grained sandpaper to a matte state. The surface should

    Читати далі »

    Soil anticorrosive ZEBRA series Kolchuga

    Surface preparation: Before painting, clean the surface of the old exfoliated paint and rust by mechanical means. Grind the surface with sandpaper and remove dust. Decrease the surface using Solvent, solvent No. 646, No. 647 TM Zebra or xylene. The surface to be painted must be dry. Dyeing: Before painting,

    Читати далі »

    Anticorrosion enamel series Kolchuga

    Application method: Surface preparation: Preparation of the surface: Metal surfaces: New – clean dust, grease, rust, scale, primer with an anti-corrosion fast-drying ZEBRA TM Kolchug series (according to the recommendations on the label). Previously painted – to clean from paint and varnish coatings, which are exfoliated, polished, remove dust. When

    Читати далі »

    Primer PF-010M with rust modifier ZEBRA

    Application method: Surface preparation: The surface to be painted must be dry, dust-free, grease, rust, scale The old paint and varnish coatings that are opaque must be removed Before finishing, make sure that the surface is completely dry Dilution: If necessary, dilute with a suitable solvent to the working viscosity.

    Читати далі »

    Lacquer Yacht ZEBRA

    Surface preparation: Prior to painting, the wooden surface must be pre-cleaned with a sandpaper, cleaned of dirt and dust. The metal surface must be cleaned of dirt, old paint coatings, peeling oil or technical oils, rust, scale and degrease the solvent. dilution: If necessary, dilute with a suitable solvent to

    Читати далі »

    Parquet Alkyd ZEBRA

    Surface preparation: Parquet varnish is applied to a clean, polished parquet When applying on the old varnish coating it is recommended to pre-treat the surface with fine-grained abrasive paper, then disassemble and degrease the surface Dilution: If necessary, dilute with a suitable solvent to the working viscosity Inappropriate dilution of

    Читати далі »

    First coat GF-021 anticorrosive ZEBRA

    Application method: Surface preparation: The surface to be painted must be dry, dust-free, grease, rust, scale The old paint and varnish coatings that are opaque must be removed Before finishing, make sure that the surface is completely dry Dilution: If necessary, dilute with a suitable solvent to the working viscosity.

    Читати далі »

    Flooring enamel for alkyd PF-266 ZEBRA

    Surface preparation: Clean the surface from the old coating that is exfoliated, dust, grease and other contaminants New products polished, cleaned of dust New wooden products are recommended to be ground with a diluted solvent enamel by 25% Before applying enamel, the surface should be dry! Dilution: If necessary, dilute

    Читати далі »

    Гаряча лінія

    0-(800)-50-18-31

    цілодобово, дзвінки зі стаціонарних і мобільних телефонів у межах України безкоштовні