BLOG

Recent comments

    Glossy enamel is professional ZEBRA

    Method of application: It is necessary to prepare the surface beforehand: clean from old coatings, grind and degrease • Before applying enamel, it is recommended to use ZEBRA dry quick-drying agent • Apply at a temperature of + 15- + 30 ° С • Shake the bottle for about minutes

    Читати далі »

    Enamel + ground 2v1 semi-matte ZEBRA

    Method of application: Pre-prepare the surface: clean from old coatings, grind and degrease • Apply at a temperature of + 15- + 30 ° С • Shake the bottle for a minimum of minutes to stir the contents. This will allow for homogeneity of the coating. • During the work

    Читати далі »

    Soak dry ZEBRA

    Method of application: Pre-prepare the surface: clean from old coatings, grind and degrease • Apply at a temperature of + 15- + 30 ° C • Shake the bottle for about minutes to stir the contents. This will allow for homogeneity of the coating. • In the course of the

    Читати далі »

    Lacquer professional ZEBRA

    Method of application: It is necessary to prepare the surface beforehand: clean from old coats, grind and degrease. • As a final layer, the varnish is applied after 30 minutes. after application of the last layer of enamel • Apply at a temperature of + 15- + 30 ° C

    Читати далі »

    Glossy enamel is professional Watercolor series

    Method of application: It is necessary to prepare the surface beforehand: clean from old coatings, grind and degrease • Before applying enamel, it is recommended to use ZEBRA dry quick-drying agent • Apply at a temperature of + 15- + 30 ° С • Shake the bottle for about minutes

    Читати далі »

    Soak dry Watercolor series

    Method of application: Pre-prepare the surface: clean from old coatings, grind and degrease • Apply at a temperature of + 15- + 30 ° C • Shake the bottle for about minutes to stir the contents. This will allow for homogeneity of the coating. • In the course of the

    Читати далі »

    Lacquer professional Watercolor series

    Method of application: It is necessary to prepare the surface beforehand: clean from old coats, grind and degrease. • As a final layer, the varnish is applied after 30 minutes. after application of the last layer of enamel • Apply at a temperature of + 15- + 30 ° C

    Читати далі »

    Гаряча лінія

    0-(800)-50-18-31

    цілодобово, дзвінки зі стаціонарних і мобільних телефонів у межах України безкоштовні